Mounting kit 3E for Loxone Intercom White Part 100484 with CodeTouch light anodized EV1, consisting of front panel, housing shell, compensation film and screw set. Compensation foil on request. Prepared for installing an ekey fingerprint reader 101 150.
  
 With the mounting kit from PebaQ you get a high-quality and weatherproof aluminum front panel, which is mounted directly on the flush-mounted box in the size of 3. The 2 individual frames required for this product for the new intercom and a code touch are available from Loxone sales, it is not included in our scope of delivery. A housing shell is plugged onto the front on the back, into which the mounting frames available from Loxone are mounted directly. The housing shell hermetically seals the unit and directs the sound of the speaker forwards through the left slot of the front panel. The right slot is used for a symmetrical look. There is a predetermined breaking point in the middle of each module position, you break it open as required and run the supply line through it. Here, too, you can additionally seal with acrylic after the cable has been routed. The front panel contains a circumferential seal (foam rubber 10mm) on the back, which prevents water from penetrating the box. Please note that the front must lie flat on the flush-mounted box. If, for example, plaster protrudes, you must also seal the front against the wall with acrylic. Above the intercom, we offer you the option of engraving your family name. It is engraved after anodizing. The lettering is discreetly visible on light anodized aluminum, while the lettering on black anodized aluminum is as light as the color of the raw material. Please order the engraving separately, item number 33-0101G for all variants.Tip: You can use a colored pen to design the engraving in the color you want.The Generation 1 Codetouch differs in height. In order to compensate for this difference in height, we can supply a 0.3 mm PVC foil on request, which is mounted under the PVC wall bracket of the old Codetouch. The foil must not be used when using the new Codetouch. You can order the 3E assembly kit in 2 different colors and in 4 different variants with regard to the accessory field. Please understand that we do not have all 8 combinations in stock, but manufacture them after receipt of the order. If a version is not in stock, the delivery time is 6-8 weeks.
  
 size
 370×150×8mm
 Version for accessories
 Area closed, customer drills himself, FE: preparation for ekey type 101 150, T2: 2 LED call buttons installed, T4: 4 LED call buttons installed
 Dimensions housing shell
 100 x 210 mm, installation depth 13 mm
 attachment
 4 safety countersunk screws with pin M5 x 16mm with Torx drive TH25 in a grid of 126 x 236 mm.
 The screws are included in the scope of delivery in the respective color.
 4 x 17-1845 Screw A2 Light on light anodized faceplates
 4 x 17-1837 screw A2 powder coated black, with black anodized front panels
 scope of delivery
 8 countersunk screws for fastening the Loxone frame in the housing shell
 4 pan head screws for attaching the housing shell to the front panel
 4 countersunk screws TX with pin
 A 0.3 mm thick compensating film is always included in the scope of delivery for the 2E variants. To mount the Codetouch Generation 1, this must be mounted between the housing shell and the mounting frame of the Codetouch.
  
 This product is a custom-made product and non-returnable!
  
 You might also be interested in:
 Intercom Gen.2
 NFC Code Touch Gen.2
 Mounting frame double