Mounting kit 1E for Loxone Intercom NEW, consisting of front panel, housing shell and screw set. Requires a Loxone single frame for the intercom.
 
 If you are the owner of the Loxone Intercom Gen. 1 (Article No. 200093) and would like to "upgrade" to the new Loxone Intercom, then this product is the solution for you.
 If you generally like the flush-mounted installation better, you can of course also use the flush-mounted installation set for new installations.
 
 If no code touch is to be used, we offer the mounting kit in version 1E in the light and black anodized versions.
 The material thickness in the lower area is 3mm and thus allows holes for further elements such as an iButton reader if necessary.
 The single frame required for the new intercom is not included in our scope of delivery.
 On the back, a housing shell is plugged into the front, into which the mounting frames available from Loxone can be mounted directly.
 
 The housing shell hermetically seals the unit and directs the loudspeaker sound to the front through the left slot on the front panel. The right slot is used for a symmetrical look.  At each module position there is a predetermined breaking point in the middle, which you break open as required and lead the supply line through. Here, too, you can additionally seal with acrylic after the cables have been routed.
 
 The front panel contains a circumferential seal (foam rubber 10mm) on the back which prevents water from entering the box. Please note that the front must lie flat on the flush-mounted or surface-mounted box. If, for example, plaster protrudes, you must also seal the front against the wall with acrylic.
 
 Above the intercom we optionally offer you an engraving of your family name. Engraving is done after anodizing. With light anodized the writing is discreetly visible, with black anodized the writing is light like the color of the raw material. 
 
 Tip: You can design the engraving yourself with a colored pencil in the desired color.
 
 An individual engraving with your name is possible at an additional cost.
 (Please include engraving text as information when ordering)
 
 
 Additional Information
 Weight
 600 g
 size
 260 × 150 × 8 mm
 Dimensions                                
 100 x 210 mm, installation depth 13 mm
 Attachment
 4 safety countersunk screws with pin M5 x 16mm with Torx drive TH25 in a grid of 126 x 236 mm.
 The screws are included in the scope of delivery in the respective color.
 4 x 17-1845 screw A2 light for light anodized front panels
 4 x 17-1837 screw A2 powder-coated black, with black anodized front panels
 scope of delivery
 8 countersunk screws for fastening the Loxone frame in the housing shell
 4 pan head screws for fastening the housing shell to the front panel
 4 countersunk screws TX with pin
 A 0.3 mm thick compensating foil is included in the scope of delivery of the variant  1E basically received. This is to be installed between the housing shell and the assembly frame of the Codetouch for the assembly of the Codetouch Generation 1.